Joint replacements are the #1 expenditure of Medicare. The process of approving these medical devices is flawed according to the Institute of Medicine. It is time for patients' voices to be heard as stakeholders and for public support for increased medical device industry accountability and heightened protections for patients. Post-market registry. Product warranty. Patient/consumer stakeholder equity. Rescind industry pre-emptions/entitlements. All clinical trials must report all data.
Please share what you have learned!
Twitter: @JjrkCh

Saturday, March 31, 2012

Consumer Reports: Most medical implants not tested

LINK to full article

CR Investigates: Dangerous medical devices
Most medical implants have never been tested for safety
Consumer Reports magazine: May 2012

Surgical mesh: No testing   |  Lap-Band: Minimal testing  |  Metal hips: Missed alarms  |  How to fix the system  |  Protect yourself against risks  |  Cardiac devices are risky, too
Tens of millions of Americans live with medical devices implanted in their bodies—artificial joints, heart defibrillators, surgical mesh. And it’s a safe bet that most of them assume that someone, somewhere, tested the devices for safety and effectiveness.
But that is rarely the case. For most implants and other high-risk devices brought to market, manufacturers do nothing more than file some paperwork and pay the Food and Drug Administration a user fee of roughly $4,000 to start selling a product that can rack up many millions of dollars in revenue. Often, the only safety “testing” that occurs is in the bodies of unsuspecting patients—including two of the three people whose stories are told in this report.
As for the smaller number of high-risk products for which advance safety studies are required, government rules allow them to be sold based on studies that are smaller and less rigorous than those required for prescription drugs.
“Standards for devices exist, they just don’t make sense,” says Diana Zuckerman, Ph.D., a vocal critic of the current system and president of the National Research Center for Women & Families, a nonprofit advocacy organization.
In 2011, a panel from the prestigious Institute of Medicine said the FDA should overhaul its device regulatory system because it fails to ensure patient safety before and after products go on the market. Instead, Congress is now debating a new law that would keep the present system virtually intact and ratify an agreement between the FDA and industry to get devices on the market even faster.
The FDA believes “the program has served American patients well,” says Jeffrey Shuren, M.D., director of the agency’s Center for Devices and Radiological Health. “As a responsible guardian of public health, the FDA believes it’s a challenge to eliminate a program without having a better alternative.”
But an investigation by Consumer Reports, which included interviews with doctors and patients and an analysis of medical research and a device-safety database maintained by the FDA, shows the following areas of concern:
                Medical devices often aren’t tested before they come on the market. “What they’re doing is conducting clinical trials on the American public,” says Dan Walter, a political consultant from Maryland. His wife was left with heart and cognitive damage from a specialty catheter, cleared without testing, that malfunctioned during a procedure to treat an abnormal heartbeat.
                There’s no systematic way for the government, researchers, or patients to spot or learn about problems with devices. “A coffeemaker or toaster oven has a unique serial number so if a problem is found, the company can contact you to warn you. Your artificial hip or heart valve doesn’t,” Zuckerman says. “Your doctor is supposed to notify you of a problem but may not be able to if he has retired or passed away.”
                Without major changes in the system, there’s not much that patients can do to protect themselves.
Below are stories from three people, injured by three very different devices, that highlight the dangers consumers face in the current marketplace.
Surgical mesh: No testing

Janet Holt was “in such pain I couldn’t sit, I couldn’t stand, and I could hardly walk.”
Photo by: Alexander Aleman
In 2007, Janet Holt of Floresville, Texas, felt swelling in her pelvic area. She went to her gynecologist, who told her that her bladder and uterus had prolapsed—dropped out of their normal position within her pelvis. The doctor recommended a hysterectomy and bladder lift.
“He talked about building a little bird’s nest to hold my bladder up,” Holt recalls. “He said I’d be back at work in two weeks.” She has yet to return to work full-time on the cattle ranch and small chain of restaurants she runs with her husband.
The “bird’s nest” turned out to be a sheet of synthetic mesh that was implanted by instruments inserted through the walls of her vagina. In the weeks and months after surgery, she says, “I was in such pain I couldn’t sit, I couldn’t stand, and I could hardly walk.” Over time, the mesh shrank and shifted, eventually working its way back out of the vaginal wall, an experience Holt likens to “open cigarette burns with each step you take. It’s complete torture.”
Today, after eight surgeries to adjust and remove the mesh, Holt, who is suing the device manufacturer, says she has been left with painful nerve damage in one leg. “I’m 54 years old and it has totally ruined my life,” she says.
Holt is one of hundreds of thousands of women implanted with transvaginal mesh for prolapse repair and bladder support since the first such products came on the market in the early 2000s. Manufacturers marketed the mesh packaged in a “kit” with tools for insertion and marketed them to doctors as an easier way to do a surgery that had traditionally required special additional training.
“The companies were saying, ‘The salesman will show you how to do it,’” said Lewis Wall, M.D., professor of obstetrics and gynecology at Washington University in St. Louis. Despite thousands of reports of adverse events, repeated alarms by women’s-health and consumer-health advocates, and multiple lawsuits, these products are still being sold—and are still classified as “moderate risk” devices.
In an August 2011 petition asking the FDA to take transvaginal mesh off the market, the consumer advocacy group Public Citizen called it “a ‘poster-child’ example of the fundamental failure ... to protect the public’s health and welfare.”
How did it happen? The mesh manufacturers took advantage of a loophole in the law that allowed them to grandfather their products onto the market without any advance safety testing.
Related Topics
                Find the right surgeon
                Hospital Ratings
                Doctors & Hospitals
Here’s how it works: Before 1976, a manufacturer could sell virtually any medical device at will. That year, a new law for the first time classified medical devices into three risk categories, with clinical data required only for devices in the highest-risk category, Class III.
The FDA has yet to fully enforce even that minimal testing requirement. The agency routinely clears new devices in all three risk classes without clinical testing as long as manufacturers can show they are “substantially equivalent” to a device that has already been on the market.
And that’s exactly what the makers of transvaginal mesh did. The mesh kits were cleared based on their “substantial equivalence” to an earlier mesh used to repair abdominal hernias that was sold as long ago as the 1950s, even though the kits were designed to be used in a different part of the body and inserted laparoscopically, not through open surgery.
“You’re putting a foreign object into the pelvis through a contaminated space, so there’s a very high potential risk of infection,” Wall says. “But there weren’t any clinical trials done with these products before they hit the market.”
“The paradox is that companies go to the FDA and claim that a device is ‘substantially equivalent,’ but when they market it, they claim it’s ‘new and better,’” says Rita Redberg, M.D., a professor of medicine at the University of California, San Francisco, and editor of the Archives of Internal Medicine. The clearance process costs manufacturers next to nothing; they pay the FDA a user fee of $4,049.
It was only in January 2012, about 10 years after the first kits hit the market, that the FDA took action. It ordered 33 companies to conduct the first-ever post-market safety studies of the products. The agency is thinking of reclassifying those mesh kits to the highest-risk Class III.
But Shuren, at the FDA, notes that with the government’s rule-making process, “from the time the FDA decides to upclassify a device to the time it can actually do it can take years.”
Lap-Band: Minimal testing
In 2009, after many unsuccessful diets, Lisa Wilson, then 46, a pharmacy technician from Seattle, received the Lap-Band adjustable gastric band.
The implanted band constricts the size of the stomach to make it difficult to eat large quantities of food. In fact, the opening left to Wilson’s stomach was so small that she had difficulty eating even small amounts of food. It also caused her to throw up almost every day.
But she stuck with it, losing 70 pounds, until a routine endoscopy in December 2010 revealed that the band had cut into her stomach lining and would have to be removed immediately. She developed a post-surgical infection that resulted in a partially collapsed lung and an eight-day hospital stay. Wilson says she has regained half of the weight she lost.
More than 650,000 Lap-Bands have been sold worldwide, according to the 2010 annual report from its manufacturer, Allergan. It’s among the minority of devices so novel that manufacturers can’t find an older product for grandfathering.
Those products usually have to undergo advance testing for safety and effectiveness to get the FDA’s approval for marketing. But the tests aren’t nearly as rigorous as those required for prescription drugs, even though, as Redberg notes, “if you have a problem with a drug, you can just stop taking it, but you can’t do that for a device implanted in your body.”
And the FDA charges device manufacturers only $220,050 to review a new device, compared with the $1.84 million it charges to review a new drug application.
If Lisa Wilson had seen the lone study on which the approval was based, she might not have been surprised by her problems. Of the 299 people in the study, 51 percent reported nausea, vomiting, or both, and 25 percent had their bands removed before the end of the three-year study because of complications or failure to lose enough weight.
“Imagine if a car had a recall rate that high,” says John Santa, M.D., director of the Consumer Reports Health Ratings Center. “Consumers and regulators would be up in arms. But in the world of medical devices, these things often stay hidden.”
The Lap-Band clinical trial was fairly typical of such pre-marketing studies. Redberg and colleagues looked at 123 studies done on high-risk cardiovascular devices that received FDA approval between 2000 and 2007. Only 27 percent met the gold standard of being randomized clinical trials, according to the report, published in December 2009 in the Journal of the American Medical Association.
Metal hips: Missed alarms
If any patient should have gone into a hip replacement fully informed, it was Stephen Tower, M.D., 55, an orthopedic surgeon from Anchorage, Alaska. Instead, he became the victim of another device that was grandfathered onto the market without clinical testing.
In this case, it was an artificial hip introduced in 2005 by DePuy, the orthopedic division of Johnson & Johnson. Called the ASR XL (shown at the top of this page), it was distinctive because both components—the ball at the top of the femur and the socket liner inside the pelvis—were made of chrome-cobalt metal.
The FDA cleared it without clinical testing based on “substantial equivalence” to earlier devices, though such metal-on-metal hips had long been on the agency’s high-priority list for requiring advance clinical trials.
The all-metal hips were supposedly a great advance over hips with the traditional plastic socket liner, Tower recalls. “The main reason hips traditionally failed was because of plastic wear,” he says. “The metal-on-metal hip was being promoted not only commercially but in the medical literature as being a solution for patients like me, who wanted to return to no-holds-barred physical activity.”
By 2006, Tower’s arthritic hip had forced him to give up practically all the outdoor pursuits he had moved to Alaska to enjoy. He had a DePuy ASR XL implanted in May of that year, and “within six weeks I did a double century bike race,” he says. He was so enthusiastic that within 10 months he had put various models of metal-on-metal hips in six of his patients.
But by the time a year had passed, it became clear that something was wrong. His hip was “pretty much constantly painful” and the chromium and cobalt levels in his blood “were notably high,” he says.Then he started noticing other problems, such as disturbed sleep, mood swings and anxiety, hearing loss, visual problems, and tinnitus.
Throughout that period, he says, he repeatedly questioned DePuy engineers, design surgeons, and sales representatives, “and they’d say, ‘Geez, Steve, we haven’t heard of this.’ ”
Tower’s symptoms became so severe at times that he was unable to work. Meanwhile, his research, some of which he has since published in medical journals, was uncovering evidence that metal debris from joint implants can cause what he describes as “profound poisoning.”
After having the hip removed in 2009 and replaced with a new one made of ceramic and plastic, his symptoms have markedly improved.
In August of 2010, DePuy recalled all 93,000 ASR XL hips worldwide after it became clear that the device was failing far more often than average and producing serious injuries. While it’s unclear how many people actually have had to have their artificial hip removed, an article in the British Medical Journal called it “one of the biggest disasters in orthopaedic history.”
Although the hip was invented and manufactured by an American company, the recall occurred because as early as three years previously—even as DePuy’s engineers were assuring Tower that the hip had no problems—regulators in Australia, England, and Wales were noticing serious problems.
They were able to do so because they have national joint registries—a list of every joint implanted—and the ability to track how patients fare with various models. There is no such national registry in the U.S., although Kaiser Permanente has a large private one.
The FDA has a voluntary system whereby doctors, manufacturers, and patients can report problems with medical devices. And though experts estimate that only a fraction of device problems ever get reported, from 2009 through 2011, the agency received 20,518 reports of injuries from metal-on-metal total hip replacements. Of those, 15,137 concerned the now recalled DePuy hip. Many of the remaining complaints concerned several other brands and models that are still on the market in the U.S.
The 2011 Institute of Medicine panel concluded that the FDA’s ability to spot problems is so inadequate that it’s “impossible to confidently draw broad conclusions about the safety and effectiveness of products that are on the market.”
How to fix the system
Consumers Union, the advocacy arm of Consumer Reports, agrees with the Institute of Medicine that the current system of medical-device regulation doesn’t protect patients from harm. Consumers Union recommends that the FDA:
                Require that implants and other “life-sustaining” devices be tested at least as rigorously as drugs.
                End the practice of “grandfathering” high-risk new implants and life-sustaining devices.
                Create a “unique identifier system,” or IDs for implants, so that patients can be quickly notified about recalls and safety problems.
                Create national registries so that problems can be spotted quickly and patients notified.
                Increase the user fees paid by manufacturers for regulatory review so that the FDA has enough money to do its job.
Have you had a problem? Tell us about it now. If you’ve had a problem with an implant or a medical device, please tell Consumer Reports about your experience. Your information is kept confidential (unless you indicate otherwise) and your story helps us monitor medical problems, research future articles, and push for reform.
To help, go to SafePatientProject.org and click on “Share Your Story” or click on “Act Now” to help us work for change.

Protect yourself against risks
Here are a few steps you can take to guard against the risks posed by dangerous medical devices.
Consider alternatives. Ask your doctor what will happen if you don’t get the implant. Many women who received transvaginal mesh for prolapse repair, for example, probably never even needed surgery.
“Pelvic organ prolapse is almost never a life-threatening condition. It’s a quality-of- life issue,” explains Daniel S. Elliott, M.D., assistant professor of urology at the Mayo Clinic College of Medicine. “The overwhelming majority of women do not need to have surgery. If you’re not bothered by it, then don’t do anything. I think many patients weren’t adequately informed about that.”
You may also have non-mesh alternatives. Elliott says he and other well-trained pelvic surgeons routinely repair prolapses with techniques that don’t require any mesh at all. On the other hand, people ill enough to need an implantable defibrillator for their heart may not have another choice.
Research the device. The Food and Drug Administration’s website, FDA.gov, has a wealth of information about device safety warnings, complaints, and recalls, easily accessible by typing the name of the device into the site’s search box. It’s also worth searching Google. If the results include a lot of law firms looking for clients injured by the device, that’s a sign to ask your doctor some hard questions.
For an optional device like a Lap-Band or breast implant, look around the Internet for patient forums. Though the information there isn’t validated, you’ll get a sense of whether patients are reporting trouble with the device.
Write down what you got. If your doctor doesn’t give you information about the brand name, model, and serial number (if it exists) of your device, ask for it. If you learn of a warning or safety recall, from the FDA or elsewhere, you’ll know whether yours is one of the problem models.
Stay alert—but don’t panic. If you learn that there are problems with your device, contact your doctor and ask what warning signs to watch for. Also go to the FDA website to read up on official warnings and find out whether it’s safe to keep the device in your body.
For example, if you have a metal-on-metal hip, call your doctor if you have pain or other unusual new symptoms, such as heart, vision, hearing, emotional, or neurological problems, because all of those might be signs of a reaction to the device. You might also want to get your blood tested for high cobalt levels, a sign that the hip is deteriorating.
But don’t assume that all problematic devices have to be removed. For example, pelvic surgeons say they often get calls from worried women who have had mesh repairs. “If the mesh is not causing any problem, don’t do anything because getting mesh out is very difficult and dangerous,” Elliott says.

Cardiac devices are risky, too
Automatic external defibrillators have been recalled 90 times in seven years.
Cardiac devices dominate the list of reports to the Food and Drug Administration of deaths and injuries. Here are three devices that have had significant problems in recent years:
Implantable cardioverter-defibrillators. Since 2009, the FDA has received reports of close to 29,000 deaths or injuries from these devices, by far the most for any device type, according to our analysis of the FDA’s database of adverse events. Implanted in more than a half-million Americans with serious heart disorders, the defibrillators detect abnormal rhythms and administer shocks to correct them.
The most troublesome aspect of the devices are the leads—wires that connect them to the heart. There have been two major recalls, in 2007 and 2011, of defective leads, the Medtronic Sprint Fidelis and the St. Jude Riata, after they had already been implanted in almost 350,000 patients. Patients with the device leads require close monitoring and face the prospect of having to have them surgically removed.
In congressional testimony in 2009, Boston cardiologist William Maisel, M.D., described what happened to a patient of his: “The simple act of removing his shirt over his head caused his … lead to fracture. [He] suffered a cardiac arrest in front of his wife.” The patient survived but never fully recovered.
Vena cava filters. These devices are placed in the vessel that returns blood from the lower body to the heart to prevent pulmonary embolism, a life-threatening condition caused by blood clots breaking loose from the leg and traveling to the lungs. Some 200,000 people get such filters each year.
Many should be removed once the danger of clots has passed, but often aren’t. In a November 2010 study in the Archives of Internal Medicine, Pennsylvania researchers found that pieces of the Bard Recovery filter had broken off and migrated elsewhere in the body in one of four study patients. One patient needed open-heart surgery.
“Remarkably,” wrote cardiologist Rita Redberg, M.D., of the University of California, San Francisco, in an editorial accompanying the report, these filters “were considered Class II by the FDA—the same risk category of mercury thermometers—and received approval without any clinical data of safety and effectiveness.”
“The devices were being used inconsistent with their FDA clearance,” says Jeffrey Shuren, M.D., director of the agency’s Center for Devices and Radiological Health. “We don’t have authority to do something about that.” If you’ve received the device, ask your doctor whether it has been removed.
Automated external defibrillators. Found in airports and other public buildings, these devices are designed so that bystanders can operate them. AEDs automatically diagnose abnormal heart rhythms and deliver shocks to people in cardiac arrest.
The problem is, they don’t always work. The industry has conducted about 90 recalls over the past several years, affecting hundreds of thousands of devices. Between 2009 and 2011, the FDA received reports of 72 injuries, 686 deaths, and 20,667 malfunctions connected with the devices. Arizona researchers found that in most cases the machines weren’t able to diagnose the abnormal rhythms properly or failed to deliver the recommended shock.
The FDA is considering whether to downgrade AEDs from the highest-risk category to moderate-risk. recalled Defibrillators have been recalled 90 times in seven years.

Editor's Note: A version of this article appeared in the May 2012 issue of Consumer Reports magazine with the headline "Dangerous Devices."










Wednesday, March 28, 2012

MDUFMA Public Meeting 3/28/12 - open letter

Docket No. FDA-2010-N-0389
March 28, 2012
Division of Dockets Management (HFA-305)
Food and Drug Administration
5630 Fishers Lane, rm. 1061 
Rockville, MD 20852
The MDUFMA agreement process was not inclusive of patient participation and the lack of funding for regulation of implanted medical devices places patients in medical and legal purgatory.  The medical device industry is lucrative and powerful and entitled.  Patients that have been implanted with failed devices are often in pain, disfigured and debilitated both mentally and financially.  They are the very people who had faith in both the FDA and the medical device industry and whose voices are suppressed.  Much evidence exists showing that the medical device industry orchestrated legislation that reduced patient protections while allowing marketing of devices with questionable value.
I am a tenacious patient advocate that has experienced rejection and barriers rather than access and support from the FDA and the device industry.  My brother, Steven Baker (FDA adverse event MedWatch 5009052 reported on 11/18/08)  had a Tornier lateral elbow prosthesis implanted at the Mayo Clinic on 5/19/2008 to reduce pain and increase function.  It did neither, and on 9/29/2008 (just 4 months later) the surgeon/designer performed “revision” surgery and removed - and confiscated- two components.  My brother was placed on long-term maximum dose hydrocodone (opiate).  His teeth began to disintegrate as he slept at night and he learned that was a side effect of the pain medication.  There was no UDI unique device identifier for the implant.  The surgeon refused to report it to the FDA as an adverse event & legally only a fatality is required to be reported. There is no registry of these devices so a patient cannot make an informed decision based upon post-market data.  Steven was not informed that the Minnesota Medical Board is considered one of the worst in the nation.  Steven was not informed that the FDA allows implanted devices on the market with no clinical testing.  Steven was not informed that 2/2008 the Supreme Court provided even more entitlement to the medical device/pharma companies with Riegel v Medtronic decision.  
All the legal wrangling to give preference to these producers of implanted medical devices loses sight of the need of the patient:  care!  Steven has not filed a lawsuit.  He has not attacked the reputation of the surgeon.  He wants care for the failed implanted device.  It is clear that access to care is also trumped by corporate greed and defensiveness:  the Mayo Clinic sent him a letter stating that only Federally mandated emergency care will be provided.  How many other harmed patients does this experience represent?
As a patient advocate, my goal is to change federal public policy to provide for safe and effective implanted medical devices.  Citizens should be able to expect the U.S. government agency (FDA) and the producers of these medical devices to have the same mission.  Financial investment in regulation should not be disparaged by the very businesses that experience the greatest profit margins of all U.S. market segments.  It cannot expect the taxpayers and harmed patients to absorb the cost of device failures.
Sincerely yours,
Joleen Chambers

Tuesday, March 27, 2012

Johnson & Toxin: Links to All Resources Used to Show Facts Against Johnson & Johnson #JNJ

Johnson & Toxin: Links to All Resources Used to Show Facts Against Johnson & Johnson #JNJ

Hospital Consent Forms do not inform patients about joint replacement purgatory.

When you sign the hospital consent form you should be informed

  •  the device company has a federal entitlement that prevents you from filing a lawsuit. 
  •  the surgeon is only required to report an adverse event to the FDA if you die.
  •  you may be in pain and disfigured from a failed device and the hospital/surgeon are legally able to send you a letter stating that only federally mandated medical care will be provided in the future. 
  • during "revision" surgery the surgeon can remove components and not be required to give them to you.
  • there are no UDI's (unique device identifiers). 
  •  the U.S. does not keep a registry of implanted devices.   

Saturday, March 24, 2012

Friday, April 27, 2012

http://bit.ly/xN2bsb  live-streamed webinar featuring patient inclusion #HITTMIT
Patient Safety and High Performance Leadership in Health Information Technology Summit

The Patient Panel - by Regina Holliday

Friday, March 23, 2012

POGO-Freedom of Information and the Public's Right to Know is personal!


Mar 21, 2012
Senate Judiciary Committee Talks FOIA and the Public's Right to Know

By SUZANNE DERSHOWITZ
Held during Sunshine Week, last Tuesday's Senate Judiciary Committee hearing, "The Freedom of Information Act: Safeguarding Critical Infrastructure Information and the Public’s Right to Know," was timely indeed. A wide range of issues were discussed, from the multi-agency FOIA portal scheduled to launch October 1 to the cybersecurity legislation pending in both the Senate and the House. The broad scope of topics covered perhaps illustrated the need for more hearings about FOIA and open government issues.
Chairman Patrick Leahy (D-VT), a longtime champion of FOIA and open government, said that “excessive government secrecy can come at an unacceptable price.” Last year, POGO and partners urged Congress to fix the over-broad and ill-defined provision relating to critical infrastructure information (CII) that the Department of Defense (DoD) was seeking in the National Defense Authorization Act (NDAA) for 2012. Sen. Leahy and Rep. Carolyn Maloney (D-NY) were successful in narrowing the blanket exemption to FOIA for CII. Their amendment requires DoD not to use FOIA’s CII exemption in cases where the public interest outweighs national security concerns. Jerry Ensminger’s testimony about the latest developments in the cover-up at Camp Lejeune demonstrated that more work needs to be done to ensure implementation of the law.
Witnesses on the first panel included Miriam Nisbet, director of the Office of Government Information Services (OGIS) and Melanie Pustay, Director of Information Policy (OIP) at the Department of Justice (DOJ). In addition to managing DOJ’s FOIA administration, OIP is responsible for encouraging and overseeing agency compliance with FOIA and for ensuring that the President’s FOIA Memorandum is fully implemented across the government. 
Sen. Grassley (R-IA) said that the President’s promise to build the most transparent administration in history has not translated into meaningful open government reform. Sen. Grassley pointed to the DOJ winning the Rosemary Award for worst open government performance in 2011.
Sens. Grassley and Leahy were clearly exasperated that Congress hadn’t received OGIS’s recommendations for improving agency compliance with FOIA. Nisbet said OGIS submitted recommendations to the Office of Management and Budget (OMB) for review over a year ago. "We haven’t received them yet,” said Leahy. “The law requires us to receive them. When will we receive them?"  He then offered to drive over to OMB to pick the recommendations up himself. When pressed, Nisbet promised to get “something” to Congress within a month.
Appearing in the second panel were Ken Bunting of the National Freedom of Information Coalition (also the executive director of the Missouri School of Journalism), Jerry Ensminger, a retired Marine Sergeant who is working tirelessly to uncover the truth surrounding the Camp Lejeune water contamination scandal, and Paul Rosenzweig, a visiting fellow to the Heritage Foundation and cybersecurity consultant.
Committee members asked DOJ’s Pustay to comment on DOJ winning the infamous Rosemary Award. Pustay said, “I feel like we have a really strong record, and I stand by it.” They also raised the allegation that she proposed a dozen regressive FOIA regulations. One of those was a rule revision proposed last March that would authorize government agencies to lie to FOIA requestors by denying the existence of certain sensitive records—something POGO strongly opposed.
Pustay went on to argue that a 2011 Supreme Court ruling had left federal agencies vulnerable and unable to protect against public disclosure on cybersecurity matters. In Milner v. Department of Navy, the Court threw out the broad use of FOIA Exemption Two, which many agencies used to deny FOIA requests and withhold information. Pustay said DOJ wants to replace the exemption that the Court threw out. She told the Committee that the Milner decision endangered “a wide range of sensitive material whose disclosure could cause harm.” However three other remaining FOIA exemptions can safeguard this information. If the Court’s decision represents such a threat to public safety, Sen. Grassley asked, why hasn’t DOJ submitted a legislative proposal to protect this information?
Ken Bunting warned the Committee that a vague, overly broad provision in the pending cybersecurity bill could serve as the basis for withholding important information from the public (POGO also has big concerns about this provision). “When cybersecurity and critical infrastructure legislation addresses public disclosure, we believe it should contain at a minimum: a tight definition of the information to be exempted; a sunset for the law itself; a sunset for the protection attached to the information; and a public-interest balancing test that allows legitimately protected information to remain protected, but information being withheld primarily to protect the government from embarrassment to be disclosed,” Bunting said.
Public interest star witness Jerry Ensminger testified on why access to information through FOIA matters and how the critical infrastructure classification can be used to keep Americans in the dark. He shared the moving and disturbing story of his personal battle to uncover the truth at Camp Lejeune. The Navy and Marine Corps have apparently strong-armed the Agency for Toxic Substances and Disease Registry (ATSDR) into redacting key portions of a report on the Camp Lejeune water system—redactions that the report’s author say compromised the report’s scientific integrity.
In his testimony, Ensminger noted that most of the documents and information that the Department of the Navy and the Marines Corps are labeling CII have been in the public domain for more than a decade, some for nearly 50 years. The Navy has failed to even mention the new public interest balancing test in its efforts to withhold scientific information on the Camp Lejeune water wells.
Paul Rosenzweig emphasized that the cyber threat is real and said complete transparency might make us less secure, claiming that FOIA exemptions on the basis of critical infrastructure are necessary. While POGO recognizes the need to shield some information from full dissemination to the public for national security purposes, we urge Congress to proceed with caution before enacting unnecessarily far-reaching exemptions. As Sen. Sheldon Whitehouse (D-RI) alluded to in one of his final questions for Rosenzweig, the potential for those with something to hide to abuse of the law is simply too great.
Suzanne Dershowitz is POGO’s public policy fellow.
Thank you, POGO! 
March 4, 2009 FOI/CDRH responded "after searching our files, we did not find the requested records" for my brother, Steven Baker's, patient-submitted 11/18/2008 FDA/MedWatch Adverse Event report MW5009052. Joint replacements are the #1 expenditure of Medicare. These devices are approved by the FDA with no clinical testing based upon predicates that may or may not be safe. There is no national registry. There is no way for a patient to make an informed decision just as consumers are able to compare appliances or automobiles. Yet, if a device fails, they are in medical and legal purgatory plus in pain and disfigured. Federal public policy must place patient safety first. Transparency will prevent others from peril and will save taxpayers billions of dollars annually.

Failed hips: J&J putting profit first

LINK HERE to full article

Hip Device Phaseout Followed F.D.A. Data Request
By BARRY MEIER   NEW YORK TIMES
Published: March 22, 2012
           
Johnson & & Johnson executives decided in 2009 to phase out a hip implant and sell off its inventories for use in patients just weeks after the Food and Drug Administration asked the company in a letter for added safety data about the implant, administration documents and corporate records show.
At the same time, the agency told the company that blood tests of some patients who got the all-metal hip showed a “high concentration of metal ions” that it found “concerning,” according to the F.D.A. letter, obtained by The New York Times under the Freedom of Information Act.
Officials also wrote that reports from countries where the implant was then being used showed it was performing “somewhat more poorly” than data submitted by the company’s DePuy Orthopaedics unit indicated. By mid-2009, for example, data from Australia showed that the device was failing at high rates just a few years after implantation, rather than lasting 15 years as expected.


The Food and Drug Administration’s statements were contained in a so-called nonapprovable letter in which the agency confidentially notified DePuy in 2009 that it was turning down the company’s application to sell the device in the United States. The bulk of the letter focused on problems that agency reviewers found with study data submitted by DePuy to support its claim that the artificial hip was safe and effective.
In its letter, the agency also asked DePuy for added safety data if it wanted to pursue its application.
DePuy did not recall the device at issue, or a companion model that was used in this country, until August 2010, a year after it got the administration’s letter. But in September 2009, just weeks after the letter arrived, company executives started a strategy to phase out the devices while selling their remaining stocks for use in patients both here and abroad, company records show.
It is not known how many patients got the hip model, known as an articular surface replacement and sold under the trademarked name ASR, during that year. In an eight-year period, some 93,000 patients worldwide received the model, about one-third of them in this country.
In addition to to dealing with a high rate of premature failure, hundreds of patients who got an ASR have suffered crippling injuries caused by particles of metallic debris generated as the all-metal implant wears.
“We are almost out of ASR, and the few doctors still using ASR are threatening to leave DePuy anyhow,” a company executive wrote in an e-mail in May 2010, nine months after the Food and Drug Administration’s letter. Thousands of patient lawsuits are proceeding against DePuy in connection with the ASR, and the e-mail is among thousands of company documents gathered by lawyers.
DePuy executives have insisted that they acted appropriately in recalling the implant model when they did, saying that before August 2010 internal company data showed that the model was performing as well as competing implants. They have also repeatedly said that their decisiondecision to phase out the model was based on slowing product sales, rather than any factors related to the device’s safety or the Food and Drug Administration’s decision not to approve the device.
Last month, after an article in The New York Times disclosed DePuy’s receipt of the administration’s letter, the company’s chief executive, Andrew Ekdahl, defended DePuy’s 2009 decision not to disclose the letter to doctors or patients. Mr. Ekdahl said any suggestion that the administration had concluded that the ASR had safety issues was “simply untrue.”
A DePuy spokeswoman, Mindy Tinsley, said the only conclusion the administration reached in its letter was that the data submitted by DePuy “was inadequate to evaluate the safety and effectiveness” of the device.
She also said comments made by company executives about selling the device’s inventories were simply part of a program to phase out the device and were not connected to safety issues.
The version of the device that the administration declined to approve for the United States was used abroad only in an alternative hip replacement procedure known as resurfacing. A sister version of the device was used both here and abroad in traditional hip replacement. Both models were based on the same component, a metal cup replacing a patient’s hip socket, which experts say was flawed in design.
Unlike the model used in resurfacing, the version used in traditional surgery was cleared by the Food and Drug Administration in 2005 through a regulatory pathway that did not require it to undergo clinical studies. Today, that device is failing prematurely at even higher rates than the one the administration would not approve, data from patient registries in Britain indicates.
In another article published last month, The Times reported that a top DePuy executive, Pamela Plouhar, had told her colleagues in a 2009 internal e-mail that the resurfacing version of the implant was not approved for sale here because of its high rate of early failure, or “revision,” during clinical trials.
To phase out the device, DePuy executives started a so-called rationalization, essentially a strategy to end the model’s production and to sell off its existing stocks while persuading orthopedic surgeons to switch to other implants from the company.
DePuy publicly announced that plan in November 2009, initially setting late 2010 as its completion date. But in the spring of 2010, a DePuy official wrote that the program would end not at a fixed date, but when all the ASR stocks “are depleted,” an internal e-mail indicates.